pay it forward.
↗Ask for help
← Newsletter
Lower your bills

Water Bill Too High? Check for Hidden Leaks

A dripping tap or silent toilet leak can waste water. Try these simple checks before buying new fixtures.

A higher water bill is a good reason to check for leaks. Start with what you already have. You do not need to buy a new toilet or a monitoring device just to begin looking.

Try the toilet test. Put a few drops of food coloring in the tank, then wait 10 minutes without flushing. If color appears in the bowl, water is leaking from the tank. Flush right after the test to help prevent stains. EPA recommends this simple check.

If you can safely read your water meter, note the reading. Avoid all water use for two hours, including appliances that use water, then check again. EPA says a changed reading probably means there is a leak.

Look under sinks and around pipe joints for moisture. Listen for a toilet that keeps running, and check taps for drips. If you rent, send your landlord a description and photos before arranging repairs. If you own the home and need help, contact a plumber.

While you arrange a fix, cut everyday waste. EPA suggests turning off the tap while brushing, running full dishwasher loads, and washing full laundry loads or choosing the right water level for smaller ones.

Keep the date, photos, and any repair receipt. Ask your water provider to explain an unusual bill and whether it offers a leak adjustment. Do not count on a credit until the provider confirms it.

Choose one step today: check a toilet, inspect a tap, or record your meter reading. Actual bill savings depend on your water use and local rates.

Sources

General information. Provider rules and assistance availability can change. Check directly with the provider or program.